Safeguarding Of Hydraulic Power Press Brakes

Product Attributes
Model No.: BLPS
Certification: CE
Wavelength: 635nm
Safety Standard: Type 4 European Standard
Applicable Standards: IEC61496-1(Type4)\ IEC61496-2(Type4)
Response Time: < 8ms
Light Source: Class 1 Laser
Operating Range: 0m - 20m
Protection Class: IP65
Power Consumption: < 5W
Output Type: PNP
Product Description
The machine frame is steel-welded construction, vibration to eliminate stress, with high strength and good rigidity.Mechanical stop and steel torsion bar to maintain synchronization and high precision.Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.Safe fence and electric inter locker have been designed for the machine to ensure the operation safety.The ram adopts hydraulic top-drive with two good quality cylinders, working smoothly and stable.The segmented punches of different length are designed which can be combined into a certain length according to the processing demand to meet the different requirement of special workpieces.Back gauge is driven by guide way, quick, convenient and accurate.The machine can be adopted with normal clamp devices or quick clamp as an option according to the customer's requirement to decrease the labors' work and increase work efficiency.

Production introduction
BLPS laser safety device provides protection zone near the die tip of the bender to protect fingers and arms of the operator in close to the upper mold die tip. It is the most effective solution so far to preserves the safety and productivity of the bender.

Product composition
Consist of emitter, receiver, controller, transmission cable and power cable.

Product features
Class 1 laser product, safe to human eyes.
Set L- type protective beam near the upper mold die tip and the detecting beam move parallel with the upper mold die tip.
Comprehensive function design to meet the security requirements of processing different shapes of the workpiece;
Independent control system, the applicable to the bender without the programming ability.
Good resistance to electromagnetic interference and light interference.

Sensors can be used alone with the control system of the press brake. Three detecting beams provide six channels of OSSD outputs, and each detecting beam provides two independent safety outputs in the form of PNP.
Receiver outputs high level under the light-passing state and outputs low level under the light-shaded state. After the object which is blocking the detecting beam remoed, OSSD automatically turns to the ON-state.

Powered by
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่  and